Beken Solutions Bk1662 Chip Set dB4238L5d-Gn Support Inertial Navigation Mode Module Antenna

• Customization: Available
• Chip: Bk1662 Chip Set
• Support Network: Nmea-0183
• Model NO.: DB4238L5D-GN
• Certification: CE, FCC, ISO/TS16949, RoHS
• Lead Time: 3-7 Days
• Sample Time: 1-3 Days
• Type: GPS Module
• Communication Type: Uart/Ttl
• Operating Voltage: 3.0V~5.5V
• Power Consumption: [email protected]
• Gnss Receiver Type1: 120 Tracking Channel and DSP Accelerator
• Gnss Receiver Type2: GPS/Qzss: L1 C/a, L5
• Gnss Receiver Type3: Glonass: L1of
• Gnss Receiver Type4: Galileo: E1(E1b+E1c), E5
• Gnss Receiver Type5: Beidou: B1I, B1c , B2a
• Gnss Receiver Type6: Inrss: L5
• Sbas: Waas, Egnos, Msas, Gagan
• Transport Package: Tray/Box/Carton
• Specification: 38.65*42.2*8.8mm
• Trademark: DeliNComm
• Origin: China
• HS Code: 8517707090
• Production Capacity: 10000/Day
• Package Size: 20.00cm * 20.00cm * 10.00cm
• Package Gross Weight: 1.000kg

Product Description

Product description                                                                     Gnss Module Antenna-- DB4238L5D-GN
 

DB4238L5D-GN is a receiver module that supports dual-band&multi-mode. it is made of the BK1662 series GNSS chip, and six axis acceleration sensor.It is a multiple function communication module which has integrated the advanced online adaptive integrated navigation algorithm and GNSS location engine, it can provide real-time, high-precision vehicle location, speed measurement and direction measurement information in any environment (such as indoor, tunnel, underground garage, etc.). When the signal accuracy is reduced and even satellite signals are lost in GNSS system, without using the odometer information, DB4238L5D-GN can use only inertial navigation technology to locate, measure the vehicle carrier accurately for a long time.

DB4238L5D-GN is a concurrent receiver module with built-in multiple positioning systems that support simultaneous reception ofBDS,GPS,Glonass, Galileo,QZSS,IRNSS and SBAS L1&L5 bands. It has 120 tracking channels, enable it to capture and track any multiple satellite signals.Compared with single GPS system, the multiple positioning system (BDS,GPS,Glonass, Galileo,QZSS,IRNSSandSBAS)of DB4238L5D-GN makes a great increase in the number of visible and available satellites, at the same time, the first positioning time is greatly reduced, even in complex urban

environment, it can achieve higher positioning precision and accuracy.

Applications

1.Vehicle High Precision Navigation

2. ITS (Intelligent Traffic System)

3. Vehicle Remote Monitoring

Features

1,Build on high performance, low-power GNSS BK1662 chip set

2,Built-in ST-LSM6DSRTR acceleration sensor to define various gravity algorithms

3, Supports BDS-3 signals

4, Supports inertial navigation mode(DR)

5, Supports Protocol:RTCM 3.3

5, Simultaneously receiving dual-band multi-system
satellite signals and all civil GNSS signals.

6.Multipath signal detection and interference suppression.

7.Passive or active antennas can be used

8, Built-in high gain LNA to improve receiving sensitivity

9, Support satellite systems: BDS, GPS,GLONASS,Galileo, QZSS,IRNSS and SBAS

10, Ultra high track sensitivity: -163dBm

11, Baud rate:115200, 10Hz

12,Protocol compliant NMEA-0183

13,Automatically inertial navigation positioning without GNSS signal

14, Automatically save GNSS log information

15, Operating voltage: 3.0V~5.5V

16, Power consumption: [email protected]

17, Patch Antenna Size:35x35x4+25x25x4mm

18, Small form factor: 38.65±0.5x42.2±0.5x8.8±0.5mm

19,Product Weight:40g

20,Communication type: UART/TTL

21, Interface type: 5pin pads

22, Recommended operating temperature range:-40to85ºC

23, RoHS compliant (Lead-free)