Chip: | Sony |
---|---|
Support Network: | GPS |
Certification: | CE, FCC, ISO2000, ISO/TS16949, RoHS |
Warranty: | 1 Year |
Chip Set: | Sony Cxd5603GF |
Communication Type: | Uart/Ttl |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
DeliNCOMM ES1010 a complete GPS engine module that features super sensitivity, ultra low power and small form factor. The GPS signal is applied to the antenna input of module, and a complete serial data message with position, velocity and time information is presented at the serial interface with NMEA protocol or custom protocol. |
Applications
|
Features
|
Parameter | Specification |
Power Supply |
|
Power Consumption |
|
Receiver Type |
|
Sensitivity |
|
TTFF (Autonomous) |
|
Horizontal Position Accuracy (Autonomous) |
|
Update Rate |
|
Accuracy of 1PPS Signal |
|
Acceleration Accuracy |
|
Dynamic Performance |
|
UART Port |
|
Temperature Range |
|
Physical Characteristics |
|
Pin No. | Pin name | I/O | DescriptionRemark | |
1 | GND | G | Ground | |
2 | TXA | O | UART Serial Data Output ,Pull up (75KΩ) if not used | |
3 | RXA | I | UART Serial Data Input, Pull up (75KΩ) if not used | |
4 | PPS | O | Time Pulse(1PPS),Leave Open in not used | |
5 | GPIO0 | I/O | General purpose I/O | |
6 | VBAT | I | RTC Battery Input | |
7 | NC | No connection | ||
8 | VCC3.3V | P | DC suppiy voltage | |
9 | RESET | I | Module Reset (Active Low) | |
10 | GND | G | Ground | |
11 | RF_IN | I | GPS&Glonass Signal Input | |
12 | GND | G | Ground | |
13 | NC | No connection | ||
14 | VCC_RF | P | Linear regulator power output, 3.3V (Do not use this as power source of backup battery) | |
15 | NC | No connection | ||
16 | TXB | O | UART Serial Data Output ,Pull up (75KΩ) if not used | |
17 | RXB | I | UART Serial Data Input, Pull up (75KΩ) if not used | |
18 | GPIO1 | I/O | General purpose I/O |
Suppliers with verified business licenses